BluePrint Engines 502 C.I.D. Chevy Big Block Short Block
BluePrint Engines · Chevy Big Block · 8.2L/502 · Short Block Engines | SKU# MLL-PS502 New
IDMLL-PS502 Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG69144 |
|---|---|
| Summit part # | MLL-PS502 |
| Manufacturer part # | PS502 |
| Brand | BluePrint Engines |
| Product line | BluePrint Engines Pro Series Chevy 502 C.I.D. Short Block Engines |
| Category | Short Block Engines |
| Part type | Short Block Engines |
| Engine family | Chevy Big Block |
| Fits | Chevrolet |
| Availability | Backorder |
| Est. ship date | Dec 17, 2026 |
Manufacturer specifications
20 fields as published by BluePrint Engines.
| Crate Engine Family | Chevy Big Block |
|---|---|
| Actual Engine Displacement | 8.2L/502 |
| Rear Main Seal Style | 1-piece |
| Crankshaft Material | Forged steel |
| Piston Material | Forged aluminum |
| Short Block Piston Style | Dome |
| Connecting Rod Material | Forged 4340 steel |
| Connecting Rod Beam Style | H-beam |
| Engine Block Material | Cast iron |
| Main Bolt Style | 4-bolt |
| Main Journal Type | Chevy 454 |
| Deck Height (in.) | 9.800 in. |
| Engine Balance | Internal |
| Oil Pan Included | No |
| Timing Cover Included | No |
| Harmonic Balancer Included | No |
| Flexplate Included | No |
| Flywheel Included | No |
| Assembled | Yes |
| Remanufactured | No |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This BluePrint Engines short block is a brand-new 8.2L (502 c.i.d.) Chevy Big Block assembly. It is built with cast iron block.
Manufacturer description
BluePrint Engines Pro Series Chevy 502 C.I.D. Short Block Engines BluePrint Engines PS502 is a high-performance, 502 cu. in. (8.2L) big block Chevy-compatible Pro Series short block engine designed for maximum durability. It features a cast-iron block with 4-bolt splayed mains, a forged crankshaft, and forged connecting rods/pistons, designed for heavy-duty street or strip applications. While marketed as a short block, this foundation is designed to support or is featured in setups that generate over 600 horsepower and 560+ ft./lbs. of torque, with some variants. Keep in mind, performance may vary depending upon cylinder heads, fuel system and intake manifold you choose for your engine build. Key features and specifications: * High-Strength Cast Iron Block—manufactured and machined in the USA! * Compression Ratio: 10.0:1 with 118cc heads and .039 in. crushed gasket * Mech fuel pump provision: Yes * One-piece rear main seal * Splayed 4-bolt main * Standard deck * 4.466 in. bore Rotating assembly: * BluePrint Forged steel crankshaft * 4.000 in. stroke * Forged H-beam 6.385 in. connecting rods * Forged 20.69cc Dome pistons * Internally balanced front and rear * Fuel recommendation: 91+ Octane
About the Chevy Big Block platform
The Mark IV and later big block Chevy answers the horsepower question with displacement. From the 454 up through 502s, 540s and 632 c.i.d. monsters, these engines make torque at rpm where a small block is still waking up.
- Torque from just off idle — ideal for heavy cars, engines and towing
- Big bore spacing supports very large displacements reliably
- Rectangle-port heads flow enough for 800-plus horsepower naturally aspirated
- Proven in marine service, which is the hardest duty cycle there is
Key specifications
- Part number: MLL-PS502
- Manufacturer part number: PS502
- Brand: BluePrint Engines
- Part type: Short Block Engines
- Assembly: Short Block
- Condition: New
- Engine family: Chevy Big Block
- Displacement: 8.2L (502 c.i.d.)
- Block material: Cast iron
- Engine balance: Internal
- Rear main seal: 1-piece
- Aspiration: Naturally Aspirated
Ideal for
Builders choose a BluePrint Engines short block like this one for custom builds with your own heads and cam, boosted and nitrous combinations, race engines built to a specific rule set, rebuilds that reuse good top-end parts and machine-shop projects. Because the heads and camshaft are left off, you keep full control over the top end and can match it to your own power target, fuel and rule book.
Ordering & shipping
Priced at $6,999, this BluePrint Engines short block is listed under part number MLL-PS502. Current estimated availability is Dec 17, 2026. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
You may also like
View all ›Our price
$6,999
BluePrint Engines 502 C.I.D. Chevy Big Block Short Block
SKU# MLL-PS502 · est. $146/mo*