Chevrolet Performance 632 C.I.D. Marine Long Block

Chevrolet Performance · Marine · 10.3L/632 · Marine Engines | SKU# NAL-19432060 New

Chevrolet Performance 632 C.I.D. Marine Long Block IDNAL-19432060 1 / 3

Buy with confidence

Listed by part number · full manufacturer specification · freight to all 50 states

Specified in full

Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.

What is included

Core returns & warranty

Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.

How it works

Freight nationwide

Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.

Shipping rates

Payment options

Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.

How to pay
Included with every engine: Pre-shipment inspectionTitle & customs paperworkDelivery quoteImport compliance
Questions? (470) 201-3931

Details

Displacement 10.3L/632
Assembly Long Block
Induction Fuel Injected
Compression 12.0:1
Block Cast iron
Condition New
Part # NAL-19432060

General

Catalogue ID ENG82715
Summit part # NAL-19432060
Manufacturer part # 19432060
Brand Chevrolet Performance
Product line Chevrolet Performance ZZ632/1000 Deluxe Long Block Crate Engines
Category Marine Engines
Part type Crate Engines
Engine family Marine
Fits Chevrolet
Availability Backorder
Est. ship date Tomorrow

Manufacturer specifications

32 fields as published by Chevrolet Performance.

Crate Engine Family Chevy Big Block
Actual Engine Displacement 10.3L/632
Crate Engine Cylinder Head Material Aluminum
Engine Block Material Cast iron
Advertised Compression Ratio 12.0:1
Assembled Yes
Engine Balance Internal
Cam Style Hydraulic roller, OE roller
Rear Main Seal Style 1-piece
Intake Manifold Included Yes
Intake Manifold Style Fuel Injection
Cylinder Heads Included Yes
Carburetor Included No
Throttle Body Included Yes
Distributor Included No
Oil Pan Included Yes
Valve Covers Included Yes
Timing Cover Included Yes
Water Pump Included Yes
Harmonic Balancer Included Yes
Flexplate Included No
Flywheel Included No
Air Cleaner Included No
Spark Plugs Included Yes
Spark Plug Wires Included Yes
Computer Included Yes
Wiring Harness Included Yes
Water Pump Style Short
Supercharger Included No
Remanufactured No
Notes Will require an internal balance flywheel or flexplate.
Special Attention Features a 4500 Dominator style flange throttle body that will need to be installed. Requires an EFI compatible high pressure fuel pump, starter, and air cleaner with 4500 style flange. Custom exhaust system required due to cylinder head port design. Not intended for marine use.

Spread the cost

Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.

Estimated from $723/mo
Call (470) 201-3931

Subject to lender approval. We are not the lender and make no credit decision.

About this engine

Overview

This Chevrolet Performance long block is a brand-new 10.3L (632 c.i.d.) Marine assembly, with a 12.0:1 compression ratio. It is built with cast iron block, aluminum cylinder heads and a hydraulic roller, oe roller camshaft. Induction is fuel injected.

Manufacturer description

Chevrolet Performance ZZ632/1000 Deluxe Long Block Crate Engines Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher Will require an internal balance flywheel or flexplate. Features a 4500 Dominator style flange throttle body that will need to be installed. Requires an EFI compatible high pressure fuel pump, starter, and air cleaner with 4500 style flange. Custom exhaust system required due to cylinder head port design. Not intended for marine use.

What is included

This long block arrives with the following fitted:

  • Computer
  • Cylinder Heads
  • Harmonic Balancer
  • Intake Manifold
  • Oil Pan
  • Spark Plug Wires
  • Spark Plugs
  • Throttle Body
  • Timing Cover
  • Valve Covers
  • Water Pump
  • Wiring Harness

About the Marine platform

Marine engines face a duty cycle no street engine ever sees: wide-open throttle for hours at a time, in water that is often salt. They are built differently as a result — marine-specific camshafts, bearings, gaskets and brass freeze plugs.

  • Marine cam profiles and valve springs suited to sustained high load
  • Corrosion-resistant internals and brass freeze plugs
  • Available in reverse rotation for the second engine in a twin installation
  • Based on proven GM small and big block architecture, so parts are easy to find

Key specifications

  • Part number: NAL-19432060
  • Manufacturer part number: 19432060
  • Brand: Chevrolet Performance
  • Part type: Crate Engines
  • Assembly: Long Block
  • Condition: New
  • Engine family: Marine
  • Displacement: 10.3L (632 c.i.d.)
  • Compression ratio: 12.0:1
  • Block material: Cast iron
  • Cylinder head material: Aluminum
  • Camshaft style: Hydraulic roller, OE roller
  • Engine balance: Internal
  • Rear main seal: 1-piece
  • Induction: Fuel Injected
  • Aspiration: Naturally Aspirated

Ideal for

Builders choose a Chevrolet Performance long block like this one for sterndrive and inboard repowers, ski and wakeboard boats, cruisers and runabouts, twin-engine installations and charter and commercial boats. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.

Ordering & shipping

Priced at $34,703, this Chevrolet Performance long block is listed under part number NAL-19432060. Current estimated availability is Tomorrow. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.

California Proposition 65

This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

ComputerCylinder HeadsHarmonic BalancerIntake ManifoldOil PanSpark Plug WiresSpark PlugsThrottle BodyTiming CoverValve CoversWater PumpWiring Harness

You may also like

View all ›
Call