ATK High Performance Engines 330 C.I.D. Chevy LS & LT Short Block HPE-SP115
ATK High Performance Engines · Chevy LS/LT · 5.4L/330 · Short Block Engines | SKU# HPE-SP115
IDHPE-SP115 1 / 8 Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG23480 |
|---|---|
| Summit part # | HPE-SP115 |
| Manufacturer part # | SP115 |
| UPC | 00653517724282 |
| Brand | ATK High Performance Engines |
| Product line | ATK High Performance Chevy LM7 5.3L GEN IV Short Blocks |
| Category | Short Block Engines |
| Part type | Short Block Engines |
| Engine family | Chevy LS/LT |
| Fits | Chevrolet |
| Availability | In stock |
| Est. ship date | Tomorrow |
Manufacturer specifications
21 fields as published by ATK High Performance Engines.
| Crate Engine Family | Chevy LS |
|---|---|
| Actual Engine Displacement | 5.4L/330 |
| Rear Main Seal Style | 1-piece |
| Crankshaft Material | Cast iron |
| Piston Material | Hypereutectic aluminum |
| Short Block Piston Style | Flat top |
| Connecting Rod Material | Powdered metal |
| Connecting Rod Beam Style | I-beam |
| Engine Block Material | Cast iron |
| Main Bolt Style | 6-bolt |
| Main Journal Type | Chevy LS |
| Deck Height (in.) | 9.240 in. |
| Engine Balance | Internal |
| Oil Pan Included | No |
| Timing Cover Included | No |
| Harmonic Balancer Included | No |
| Flexplate Included | No |
| Flywheel Included | No |
| Assembled | Yes |
| Remanufactured | Yes |
| Notes | OEM GM 58 tooth reluctor wheel. |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This ATK High Performance Engines short block is a remanufactured 5.4L (330 c.i.d.) Chevy LS / LT assembly. It is built with cast iron block.
Manufacturer description
ATK High Performance Chevy LM7 5.3L GEN IV Short Blocks ATK High Performance Chevy LM7 5.3L Gen IV short blocks are assembled with OE flat top pistons and offer these engine specifications: * Seasoned 5.3L LM7 Gen IV block * 1999-2007 year range * Bore/stroke: 3.810 in. x 3.622 in. * Displacement: 330 cu.in * OEM GM 58-tooth reluctor wheel crankshaft * OEM GM forged powder metal rods * Stock hypereutectic flat top pistons with two valve reliefs * Compression ratios: 61cc = 9.8:1/64cc = 9.5:1/68cc = 9.1:1 -- Can vary due to deck height/gasket thickness * Plasma moly rings * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed OEM GM 58 tooth reluctor wheel.
About the Chevy LS & LT platform
The LS is the defining swap engine of the last twenty years: an all-aluminium (or iron-block engine) pushrod V8 that is short, light, and makes more power per dollar than anything else you can bolt to a transmission. The Gen V LT that followed added direct injection and variable valve timing.
- Enormous aftermarket — headers, oil pans, accessory drives and swap mounts exist for almost every chassis
- Compact for its displacement: an LS fits where a small block Chevy fits, and often weighs less
- Responds dramatically to a cam and intake, and takes boost well with forged internals
- Junkyard-to-crate continuum means parts and knowledge are everywhere
Key specifications
- Part number: HPE-SP115
- Manufacturer part number: SP115
- Brand: ATK High Performance Engines
- Part type: Short Block Engines
- Assembly: Short Block
- Condition: Remanufactured
- Engine family: Chevy LS/LT
- Displacement: 5.4L (330 c.i.d.)
- Block material: Cast iron
- Engine balance: Internal
- Rear main seal: 1-piece
- Aspiration: Naturally Aspirated
- UPC: 00653517724282
Ideal for
Builders choose a ATK High Performance Engines short block like this one for custom builds with your own heads and cam, boosted and nitrous combinations, race engines built to a specific rule set, rebuilds that reuse good top-end parts and machine-shop projects. Because the heads and camshaft are left off, you keep full control over the top end and can match it to your own power target, fuel and rule book.
Ordering & shipping
Priced at $2,009, this ATK High Performance Engines short block is listed under part number HPE-SP115 (UPC 00653517724282). Current estimated availability is Tomorrow. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
You may also like
View all ›
Chevrolet Performance 502 C.I.D. Chevy Big Block Short Block
8.2L/502
$7,931
Ford Performance Parts 302 C.I.D. Ford Modular & Coyote Short Block FMS-M6009A50SCB
5.0L/302
$5,947
ATK High Performance Engines 376 C.I.D. Chevy LS & LT Short Block
6.2L/376
$7,399
BluePrint Engines 502 C.I.D. Chevy Big Block Short Block
8.2L/502
$6,999
Our price
$2,009
ATK High Performance Engines 330 C.I.D. Chevy LS & LT Short Block HPE-SP115
SKU# HPE-SP115 · est. $42/mo*