ATK High Performance Engines 632 C.I.D. Chevy Big Block Short Block
ATK High Performance Engines · Chevy Big Block · 10.3L/632 · Short Block Engines | SKU# HPE-SP108 New
IDHPE-SP108 1 / 7 Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG12353 |
|---|---|
| Summit part # | HPE-SP108 |
| Manufacturer part # | SP108 |
| UPC | 00653517725128 |
| Brand | ATK High Performance Engines |
| Product line | ATK High Performance Chevy 632 Short Blocks |
| Category | Short Block Engines |
| Part type | Short Block Engines |
| Engine family | Chevy Big Block |
| Fits | Chevrolet |
| Availability | Backorder |
| Est. ship date | Jan 26, 2027 |
Manufacturer specifications
21 fields as published by ATK High Performance Engines.
| Crate Engine Family | Chevy Big Block |
|---|---|
| Actual Engine Displacement | 10.3L/632 |
| Rear Main Seal Style | 2-piece |
| Crankshaft Material | Forged 4340 steel |
| Piston Material | Forged aluminum |
| Short Block Piston Style | Flat top |
| Connecting Rod Material | Forged 4340 steel |
| Connecting Rod Beam Style | H-beam |
| Engine Block Material | Cast iron |
| Main Bolt Style | 4-bolt |
| Main Journal Type | Chevy 454 |
| Deck Height (in.) | 10.200 in. |
| Engine Balance | Internal |
| Oil Pan Included | No |
| Timing Cover Included | No |
| Harmonic Balancer Included | No |
| Flexplate Included | No |
| Flywheel Included | No |
| Assembled | Yes |
| Remanufactured | No |
| Notes | Compression options range from 10.6:1-11.3:1 depending on deck height and gasket thickness. |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This ATK High Performance Engines short block is a brand-new 10.3L (632 c.i.d.) Chevy Big Block assembly. It is built with cast iron block.
Manufacturer description
ATK High Performance Chevy 632 Short Blocks ATK High Performance Chevy 632 short blocks are based on dyno proven combinations built with name brand parts. Each short block is hand-built and inspected for precision tolerances. Rotating assemblies are balanced; and stroker builds are oversize of stock bore and stroke. Short blocks are shipped strapped on a wooden pallet crate. Engine Specifications: * Block: Dart Big M Sportsman 4-bolt main 2-piece rear main seal * Bore/Stroke: 4.600 in. x 4.750 in. * Displacement: 632CI * Crankshaft: Scat 4340 forged internally balanced * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: 2618 forged +3.4cc flat tops * Compression ratios: 112cc = 11.3:1 / 118cc = 10.8:1 / 121cc = 10.6:1 (can vary due to deck height/gasket thickness) * Rings: Plasmamoly * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed Recommended Components: * Balancer: Internal balance * Flexplate / Flywheel: Internal balance * Head gasket: .038 in. or per application Engine Info: * Oil: 10W30 Conventional / Non-Synthetic for first 3,000 miles * Oil filter: Wix or K&N per application * Head gaskets: .038 in. or per application Compression options range from 10.6:1-11.3:1 depending on deck height and gasket thickness.
About the Chevy Big Block platform
The Mark IV and later big block Chevy answers the horsepower question with displacement. From the 454 up through 502s, 540s and 632 c.i.d. monsters, these engines make torque at rpm where a small block is still waking up.
- Torque from just off idle — ideal for heavy cars, engines and towing
- Big bore spacing supports very large displacements reliably
- Rectangle-port heads flow enough for 800-plus horsepower naturally aspirated
- Proven in marine service, which is the hardest duty cycle there is
Key specifications
- Part number: HPE-SP108
- Manufacturer part number: SP108
- Brand: ATK High Performance Engines
- Part type: Short Block Engines
- Assembly: Short Block
- Condition: New
- Engine family: Chevy Big Block
- Displacement: 10.3L (632 c.i.d.)
- Block material: Cast iron
- Engine balance: Internal
- Rear main seal: 2-piece
- Aspiration: Naturally Aspirated
- UPC: 00653517725128
Ideal for
Builders choose a ATK High Performance Engines short block like this one for custom builds with your own heads and cam, boosted and nitrous combinations, race engines built to a specific rule set, rebuilds that reuse good top-end parts and machine-shop projects. Because the heads and camshaft are left off, you keep full control over the top end and can match it to your own power target, fuel and rule book.
Ordering & shipping
Priced at $7,749, this ATK High Performance Engines short block is listed under part number HPE-SP108 (UPC 00653517725128). Current estimated availability is Jan 26, 2027. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
You may also like
View all ›Our price
$7,749.99
ATK High Performance Engines 632 C.I.D. Chevy Big Block Short Block
SKU# HPE-SP108 · est. $161/mo*